- New
DUKE RIM LUCKY JACK 3K
Multipurpose carbon rim for XC in all its forms XCO, XC Marathon
- LIGHTNESS
- ASYMETRY
- LATERAL RIGIDITY
- COMFORT
- INTERIOR WIDTH 25MM
- NERVOSITY
The multiple champions of the World rim, Europe and France! Used by the best teams and riders in the world (Absolut Abasalon Team, BMC Racing Team, Team Scott Creuse O2, Focus MTB Racing Team etc ..., as well as a certain champion of the Netherlands on Road, MTB and CX and also CX World Champion.
JANTE DUKE LUCKY JACK
The Lucky Jack by DUKE is a very light and broad rim for cross country and marathon use. Weighing 330g the weight is surprisingly low. Great value have the dimensions of the rim. With 31 mm outside and 25.6 mm inside the rim provides not only an excellent lateral stiffness, but also the tire optimum support width. Also at low air pressure, the driver (in) no spongy driving feel, as the tires can snap off bad side. Grip and comfort of the tire increase remarkably! Of course, the rim can be driven with sealing Tubeless "milk". The wheels are provided with an asymmetrical rim profile, which requires a more uniform pitch angle of the spokes. This optimization of the spoke angle brings a number of advantages. The spoke tension on both sides can be better matched to one another, what is the shelf life of the spokes and the entire impeller conducive. The normally directional lateral stiffness is also adjusted so that the wheel appear rigid in itself. The height of the rim edge for 2015 is reduced by 1mm to further limit any risk of contact with the ground. Lateral stiffness improved by 40% compared to the previous version. Resistant to impacts even on the most brittle ground: Absorption of impact energy improved by more than 50% compared to the previous model. Anti-burp system: the heel of the tire is held in position whatever its pressure, no risk of "unseating". For the rim a Rider weight limit (incl. Clothing and luggage) applies: 90 kg!
Data sheet
- RIM MATERIAL
- CARBON
- RIM PROFILE
- ASYMMETRIC
- INSIDE WIDTH (MM)
- 25.6
- TYPE OF BRAKING
- DISC
- MAX STRAIN (N)
- 1200.0
- PRACTICE TYPE
- GRAVEL BIKE
XC
XC ENGAGED - NIPPLE POSITION
- EXTERNAL
- NIPPLE HEIGHT (MM)
- 14.0
- TYPE OF TYRE
- CLINCHER
TUBELESS - POSITION
- FRONT
REAR - VALVE HEIGHT (MM)
- 34
- TAPE WIDTH (MM)
- 26.0
- MAX PRESSURE (BAR)
- 2.5B WITH 2.10" TYRE
- ERD JANTE(S)
- LJ 27,5" : 563
LJ 29" : 600 - SYSTEM MAX WEIGHT (KG)
- 95
- RIM HEIGHT (MM)
- 19
- ETRTO (MM)
- 584.0
622.0 - RIM OFFSET (MM)
- 2.6
- MOUNTING WITH WASHERS
- NO
- TYRE SECTION RANGE
- 34MM 1,35" / 61MM 2,40"
- STICKERS RANGE
- DUKE SERIE2 L
- STICKER TYPE
- L50
- WARRANTY
- 2 YEARS
Crash replacement
We offer a crash replacement programme for carbon wheels. In case of accidents or heavy falls, violent shocks can damage your rim and make it impossible to use. With our Crash Replacement offer we offer you a service that allows you to replace your rim under special conditions: You get a 50 percent discount on the price of the rim (UD SLS carbon) 40 percent (3k Carbon), as well as the parts and the disassembly/reassembly. This offer is valid (for life) for an unlimited period of time for DUKE carbon rims and is transferable in the event of sale of the wheels to a third party.